Tag Archives: hydraulic stage

China Good quality Pto Drive Factory Direct OEM CZPT CZPT T6 T7 Series T6gcc T7gbb 2 Stage Pto Hydraulic Pump double u joint pto shaft

Product Description

pto drive factory direct OEM CZPT CZPT T6 T7 Series T6gcc T7gbb 2 Stage Pto Hydraulic Pump

*Hydraulic pumps parts with factory-direct prices
* All pumps and parts are 100% interchangable with original
* 100% tested before delivery


Product Description

*Operation:  These pumps are specially designed for PTO drives for direct installation (Tipping,trucks, refuse trucks cranes…)
These T6 and T67 series vane pumps have been equipped with B or C cartridges in mobile version. The combination of different cartridges in single and double pumps allows low flow at high pressure and high flow at lower pressure. This is the clever way to optimize your circuit design. In double pumps, the larger suction port is common.

Products Features

HIGH PRESSURE: B size cartridee:300 bar max.
C size cartridge: 275 bar max.
WIDE SPEED RANGE :400 to 2800 RPM.
HIGH EFFICIENCY: Over 94% under high pressure, which increases the productivity and reduces the heating and operations costs.
HIGH SHAFT LOAD CAPABILITY: High shaft load capability up to 7500 N radial load on T6GC shaft
LOW NOISE LEVELS: Low noise levels
MOUNTING FLEXIBILITY: Single pump:4 different positions    Double pump : 32 different positions


Detailed Photos

Parts Available :



Product Parameters


T6GCC -B10 -B10 -6 R 00 -A 1 01
Series Flow code Flow code Shaft type Rotation Outlet Positions Design
T6GCC B03.B05.B06.B08
B20.B22,B25, B28
B20.B22,B25, B28
See size of
Viewed form
shaft end of
right hand for
left hand
for counter-
from shaft end of pump)
A 1-S1.
NBR Nitnile rubber
00, 01, 10, 11
T67GCB B03.B05.B06.B08
B20.B22,B25, B28
T7GBB B02.B03.B04.B05

Production procedure


Packaging & Shipping


Shipping Mode: By air, by sea ,by express (DHL,Fedex,  ,etc.)
Standard Shipping Time: By air within 5-6 days. By DHL: within 4-5days.by sea about 1 month
Standard Packing: Carton or wooden case
Special Packing: We can discuss and support you.


Company Profile


HangZhou CZPT hydraulic Pump Co., Ltd is a professional hydraulic pump manufacturer in China. We are specialized in research,development, production and sales of high-end hydraulic pump products.
Our technical team all with more than 20 years experience, cheif engineer and workers are from Hytek( high-tech). We have strong research and development ability
The Main products: CZPT T6, T7, CZPT V/VQ, V10, V20, CZPT SQP; CZPT PV2R, PGH4, PGH5 gear pumps, high pressure piston pumps and parts.




1.Q: Is your company a trading company or a manufacturer? 
A: Our company is manufacturer, we have our own factory for production.
2.Q:What about the quality control and warranty ?
A: “All products is 100% checked & tested before packing and shipping.
Our products have one year warranty, lifetime technical support.
3.Q:Can you provide samples for checking and testing?
A:yes,we can provide samples for you to check the  quality and real performance 

4.Q:What’s your main application? 
A–Construction machinery-Industrial Application-Construction Machinery-Engineer machinery etc

5.Q:What’s your main application? 

6.Q:.Can I Mark My Own Brand On The Pump? 
A–Yes. We can OEM your brand and code.

7.Q:.How long is your delivery time? 
A-2 working days for sample order, 15 working days for bulk orders

8.Q:.If your pump and parts are interchangable with Original
A–Yes. All pumps and parts are 100% interchangable with original

Welcome to Contact us:


After-sales Service: Lifetime Technical and Accessory Support
Warranty: One Year
Acting Form: Vane Pump
Type: Vane Pump
Displacement: Fixed Displacement
Performance: High Pressure
US$ 350/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

Shaft Collar

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.


Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Good quality Pto Drive Factory Direct OEM CZPT CZPT T6 T7 Series T6gcc T7gbb 2 Stage Pto Hydraulic Pump   double u joint pto shaftChina Good quality Pto Drive Factory Direct OEM CZPT CZPT T6 T7 Series T6gcc T7gbb 2 Stage Pto Hydraulic Pump   double u joint pto shaft
editor by CX 2023-10-25