Description
Extra-large taper lock bushing range covering EP-6050, EP-7060, EP-8065, EP-10085 and EP-120100 with listed inch and metric bore ranges.
Model Range
| EP Model | A (in) | B (in) | D (in) | Fastener | Listed Bore Range |
|---|---|---|---|---|---|
| EP-6050 | 9 1/4 | 5 | 9 | 3 x 1 1/4 x 3 1/2 socket head cap screws | 4 7/16 to 6 in |
| EP-7060 | 10 1/4 | 6 | 10 | 4 x 1 1/4 x 3 1/2 socket head cap screws | 4 15/16 to 7 in |
| EP-8065 | 11 1/4 | 6 1/2 | 11 | 4 x 1 1/4 x 3 1/2 socket head cap screws | 5 7/16 to 8 in |
| EP-10085 | 14 3/4 | 8 1/2 | 14 1/2 | 4 x 1 1/2 x 4 1/4 socket head cap screws | 7 to 10 in |
| EP-120100 | 17 1/4 | 10 | 17 | 6 x 1 1/2 x 4 1/4 socket head cap screws | 8 to 12 in |
Selection Notes
These larger models publish both inch and metric bore ranges, and the fastener quantity changes by size. State units explicitly, confirm the shaft/keyway data, and allow for installation/removal access and machine-level handling of the larger components.
RFQ Information
Send the EP model, required shaft bore, keyway reference, mating component, quantity and a drawing or photo when replacement identification is uncertain.
Can the models in this range be selected only by outside diameter?
No. Confirm the model or the full geometry, shaft bore, keyway and mating hub interface before ordering.
Are all bore and keyway combinations the same?
No. The available bore/keyway combination depends on the selected EP model and should be confirmed for the order.
