Tag Archives: iron bushing

China supplier 1210 European Standards Cast Iron Taper Lock Bush Pulley Taper-Lock Clamping Bush Shaft-Hub Connection for Transmission bushing assembly

Product Description

Taper lock bushing,

        1. Taper bushes form the most convenient and cost effective method of fixing components to a

            Mating shaft, without the need for any machining process.

        2. Size ranges from 1,more information,please contact us.

        3. Easy to install and remove.

        4. Shallow keyway is available.

To Install:

1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.
Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on 1 side only).

2.Oil thread and point of set screws or thread and under head of cap screws.
Place screws loosely in holes thatare threaded in hub 1 side see install bore.

3.Make sure bushing is free in hub.Slip assembly CHINAMFG shaft and locatd in position desired.

4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,
please refer to taper bushing screw torque which need to be asked.

5.If stall key,place it in the shaft keyway before install taper bushing.

6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO
Pulley Sizes: Type B
Manufacturing Process: Casting
Material: Iron
Surface Treatment: Oxygenation
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Are there any online calculators for determining the required taper bush size?

Yes, there are online calculators available that can help in determining the required taper bush size for specific applications. These calculators utilize various input parameters such as shaft diameter, hub diameter, torque, speed, and other relevant factors to provide recommendations on the appropriate taper bush size. Here are some sources where you can find online calculators for determining the required taper bush size:

  • Manufacturer Websites: Many taper bush manufacturers provide online calculators on their websites to assist customers in selecting the correct taper bush size. These calculators are often based on the manufacturer’s specific product range and include fields for inputting the necessary parameters. By entering the required information, such as shaft and hub dimensions, torque, and speed, the calculator can generate recommendations on the suitable taper bush size.
  • Engineering and Mechanical Websites: Several engineering and mechanical websites offer online calculators and tools that cover a wide range of mechanical components, including taper bushes. These calculators are typically designed to provide general recommendations and may not be specific to a particular manufacturer’s product range. They often require input parameters such as shaft diameter, hub diameter, and other relevant dimensions to calculate the appropriate taper bush size.
  • Mobile Applications: Some mobile applications cater to mechanical engineering and power transmission calculations. These apps may include features for determining the required taper bush size based on input parameters such as shaft diameter, hub diameter, torque, and speed. They can be convenient for on-the-go calculations and are often available for both Android and iOS devices.

When using online calculators for determining the required taper bush size, it is important to ensure that the input parameters are accurate and representative of the specific application requirements. The calculated results should serve as a starting point for selecting the appropriate taper bush size, and it is advisable to cross-reference the recommendations with manufacturer catalogs or consult with technical experts to verify the suitability of the chosen size.

Additionally, keep in mind that while online calculators can be helpful tools, they may not account for all the nuances and specific factors of your application. It is still recommended to consult with taper bush manufacturers, suppliers, or engineering professionals to validate the calculated size and ensure a proper fit for your specific application.

By utilizing online calculators as a guide, you can simplify the process of determining the required taper bush size and make informed decisions when selecting the appropriate component for your application.

taper bush

Where can I find tutorials on removing and replacing taper bushes in machinery?

If you are looking for tutorials on removing and replacing taper bushes in machinery, there are several resources available that can provide step-by-step instructions and guidance. Here are some places where you can find tutorials on this topic:

  • Manufacturer or Supplier Websites: Many manufacturers or suppliers of taper bushes provide instructional materials on their websites. These tutorials may include written guides, videos, or diagrams that demonstrate the process of removing and replacing taper bushes in specific machinery. Visiting the websites of reputable taper bush manufacturers or suppliers and exploring their technical resources or support sections can often lead you to detailed tutorials.
  • Online Video Platforms: Websites such as YouTube, Vimeo, or Dailymotion host a vast collection of instructional videos on various topics, including machinery maintenance and repair. Searching for keywords like “taper bush removal” or “taper bush replacement” on these platforms can yield tutorial videos that demonstrate the process visually. These videos can be helpful in understanding the practical steps involved in removing and installing taper bushes.
  • Industrial Training Courses or Workshops: Some organizations or training institutes offer industrial maintenance or machinery repair courses that cover topics like taper bush removal and replacement. These courses may be available online or in-person, providing hands-on training and demonstrations. Participating in such training programs can give you a comprehensive understanding of the process and allow you to practice the skills under expert guidance.
  • Engineering or Mechanical Forums: Online forums or communities focused on engineering or mechanical topics often have dedicated sections or threads where users discuss machinery maintenance and repair procedures. Browsing through these forums or posting specific questions related to taper bush removal and replacement can help you find valuable insights, tips, and resources shared by professionals or experienced enthusiasts in the field.
  • Industry Publications or Books: Industrial magazines, books, or technical publications related to machinery maintenance and repair may include chapters or articles that cover taper bush removal and replacement. These resources often provide detailed explanations, accompanied by illustrations or diagrams, to guide you through the process. Checking relevant publications in the field of mechanical engineering or power transmission can provide you with in-depth tutorials.

When using tutorials, it’s important to ensure that the information is from reliable sources and applicable to your specific machinery and taper bush type. Always refer to the manufacturer’s instructions and follow proper safety procedures when working with machinery components.

By exploring these various resources, you can find tutorials on removing and replacing taper bushes in machinery, enabling you to perform these maintenance tasks effectively and safely.

taper bush

What is a taper bush, and how does it work in mechanical applications?

A taper bush, also known as a taper lock bushing, is a mechanical component used to secure rotating shafts or hubs to mating equipment, such as pulleys, sprockets, or gears. It provides a reliable and secure connection that can withstand high torque and axial loads. Here’s how a taper bush works in mechanical applications:

A taper bush consists of a tapered sleeve with an external taper and a corresponding tapered bore. The external taper is designed to match the taper of the mating component, while the tapered bore fits onto the shaft or hub. The taper of the bush and the mating component create a tight interference fit when assembled.

The installation process involves sliding the taper bush onto the shaft or hub and then tightening a set of screws or bolts. As the screws or bolts are tightened, they exert radial pressure on the taper bush, causing it to expand and grip the mating component tightly. This creates a frictional connection between the taper bush, the shaft or hub, and the mating component, effectively locking them together.

The advantages of using a taper bush in mechanical applications include:

  • Easy Installation: Taper bushings are relatively simple to install. They eliminate the need for complex machining or keyways on the shaft or hub, as the interference fit provides the necessary grip.
  • Secure Connection: The taper lock mechanism ensures a secure and backlash-free connection between the shaft or hub and the mating component. It can withstand high torque and axial loads without slipping or loosening during operation.
  • Accommodation of Different Shaft Sizes: Taper bushings are available in various sizes and tapers to accommodate different shaft diameters and mating components. This versatility allows for flexibility and interchangeability in mechanical designs.
  • Easy Removal and Replacement: In case of maintenance or replacement needs, taper bushings can be easily removed by loosening the set screws or bolts. This facilitates quick disassembly and reassembly without causing damage to the shaft or hub.
  • Reduced Downtime: The ease of installation and removal, combined with the secure connection provided by taper bushings, helps minimize downtime during equipment maintenance or component replacement.

Taper bushings are commonly used in a wide range of mechanical applications, including power transmission systems, conveyor systems, industrial equipment, and automotive applications. They offer a reliable and cost-effective method for connecting rotating shafts or hubs to mating components, ensuring efficient power transmission and reliable operation.

When using taper bushings, it’s important to follow the manufacturer’s guidelines for installation and tightening torque to ensure proper functionality and avoid any potential issues.
China supplier 1210 European Standards Cast Iron Taper Lock Bush Pulley Taper-Lock Clamping Bush Shaft-Hub Connection for Transmission   bushing assembly		China supplier 1210 European Standards Cast Iron Taper Lock Bush Pulley Taper-Lock Clamping Bush Shaft-Hub Connection for Transmission   bushing assembly
editor by CX 2023-12-26

China Professional Cast Iron V Belt Pulley Taper Bushing Taper Lock Bush wholesaler

Product Description

Product Description

High quality taper bush taper lock supplier

Taper Lock Bush model as below:
1008,1108,1210,1215,1310,1610,1615,2012,2517,2525,3571,3030,
3535,4040,4545,5050,6050, 7060, 8060, 10085, 125710
Material of Taper Bush: Cast Iron, GG22, GG25, steel(45)
Surface treatment: Black-phosphated or original color without finishing

Advantages of Taper Bush:
*Easy on-easy off;
*Machined to high precise tolerance;
*A full range of both metric and inch sizes taper bushes are available;
*ISO9001:2008 certificated;
*Most of our Taper lock bushes are exported to Europe and North America.

Feature:

1.  The simple design allows for easy maintenance, it is a simple easy-on, easy-off process.
2. Machined to high precise tolerance
3. A full range of both metric and imperial sizes taper bushes are available
4. Complete short reach range available, for compact lightweight assemblies

Taper Bush 

1.Model: 1008-5050,6050-12100
2.Material: High grade cast iron GG22-GG25;Steel C45
3.Surface treatment: Blank/phosphated/black finished

QD Bushing 

1.Model:H/JA/SH/SDS/SD/SK/SF/E/F/J/M/N/P/W/S,orG/H/P1/P2/P3/B/Q1/Q2/Q3/R1/R2/S1/S2/U0/U1/U2/W1/W2/Y0 
2.Material: Cast iron GG25/steel;
3.Surface treatment: Blank/phosphated/black finished

Name

Taper Bush

Surface treatment

Blank/phosphated/black finished

Model

1008-5050,6050-12100

Material

Cast Iron GG22-GG25,Steel C45

QD Bushing model

H/JA/SH/SDS/SD/SK/SF/E/F/J/M/N/P/W/S,orG/H/P1/P2/P3/B/Q1/Q2/Q3/R1/R2/S1/S2/U0/U1/U2/W1/W2/Y0

Product Parameters

Packaging & Shipping

All the products can be packed in cartons,or,you can choose the pallet packing.

MADE IN CHINA can be pressed on wooden cases.Land,air,sea transportation are available.UPS,DHL,TNT,

FedEx and EMS are all supported.

Company Profile

About Mighty Machinery

ZheJiang Mighty Machinery Co., Ltd., specializes in manufacturing Mechanical Power Transmission Products. After over 13 years hard work, MIGHTY have already get the certificate of ISO9001:2000 and become a holding company for 3 manufacturing factories. 

 

MIGHTY advantage

1, Abundant experience  in the mechanical processing industries.

2,Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and  production in time.

3,Now have 5 technical staff, we have strong capacity for design and process design, and more than 70 worker now work in our FTY and  double shift eveyday.

4,Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production inspection which can ensure the perfect of the goods quality.

5,Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.

FAQ

Q: How long can I get reply after send inquiry?

A: All inquiries will be replied within 12 hours, also you may call us at any time.
 
Q: How soon can I get sample ?

A: Generally standard sample can be send out within 7days, and for the customize parts, it will depond on the detail requirment.
 
Q:What information should I give to you for inquiry?

A:Pls send the detail of the specification and QTY, also specail demands etc, and it’s better you can send us the detail drawings or catalogue.

Q: If I don’t have drawing or catalogue, how can I get sample ?

A:If you don’t have the drawing or catalogue, you can send us your sample, so we can make the drawing and sample accordingly.

Q:What is the Warranty for your products?

A:Normally our warranty is 1 year.

Standard or Nonstandard: Standard
Feature: Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Acid-Resistant, High Temperature-Resistance
Application: Conveyer Equipment
Surface Treatment: Phosphating
Material: Cast Iron
Warranty: 6 Months
Samples:
US$ 8.67/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Are there any online calculators for determining the required taper bush size?

Yes, there are online calculators available that can help in determining the required taper bush size for specific applications. These calculators utilize various input parameters such as shaft diameter, hub diameter, torque, speed, and other relevant factors to provide recommendations on the appropriate taper bush size. Here are some sources where you can find online calculators for determining the required taper bush size:

  • Manufacturer Websites: Many taper bush manufacturers provide online calculators on their websites to assist customers in selecting the correct taper bush size. These calculators are often based on the manufacturer’s specific product range and include fields for inputting the necessary parameters. By entering the required information, such as shaft and hub dimensions, torque, and speed, the calculator can generate recommendations on the suitable taper bush size.
  • Engineering and Mechanical Websites: Several engineering and mechanical websites offer online calculators and tools that cover a wide range of mechanical components, including taper bushes. These calculators are typically designed to provide general recommendations and may not be specific to a particular manufacturer’s product range. They often require input parameters such as shaft diameter, hub diameter, and other relevant dimensions to calculate the appropriate taper bush size.
  • Mobile Applications: Some mobile applications cater to mechanical engineering and power transmission calculations. These apps may include features for determining the required taper bush size based on input parameters such as shaft diameter, hub diameter, torque, and speed. They can be convenient for on-the-go calculations and are often available for both Android and iOS devices.

When using online calculators for determining the required taper bush size, it is important to ensure that the input parameters are accurate and representative of the specific application requirements. The calculated results should serve as a starting point for selecting the appropriate taper bush size, and it is advisable to cross-reference the recommendations with manufacturer catalogs or consult with technical experts to verify the suitability of the chosen size.

Additionally, keep in mind that while online calculators can be helpful tools, they may not account for all the nuances and specific factors of your application. It is still recommended to consult with taper bush manufacturers, suppliers, or engineering professionals to validate the calculated size and ensure a proper fit for your specific application.

By utilizing online calculators as a guide, you can simplify the process of determining the required taper bush size and make informed decisions when selecting the appropriate component for your application.

taper bush

Are there online forums discussing the proper maintenance of taper bushes?

Yes, there are online forums where you can find discussions and information about the proper maintenance of taper bushes. These forums serve as platforms for professionals, enthusiasts, and individuals with expertise in mechanical engineering, power transmission, and machinery maintenance to share knowledge and discuss various topics related to taper bushes and their maintenance. Here are some examples of online forums where you can find discussions on taper bush maintenance:

  • Mechanical Engineering Forums: Online forums dedicated to mechanical engineering often have sections or threads where users discuss topics related to machinery maintenance. These forums provide a platform for professionals and enthusiasts to exchange information and share experiences regarding taper bushes and their proper maintenance. Participating in these discussions can provide valuable insights, tips, and best practices from a community of experts.
  • Power Transmission and Machinery Maintenance Forums: There are online forums specifically focused on power transmission systems, machinery maintenance, and related topics. These forums cover a wide range of subjects, including taper bushes and their maintenance. Users can ask questions, seek advice, and share their experiences regarding the proper maintenance procedures, troubleshooting, lubrication, or replacement of taper bushes in different machinery applications.
  • Industry-Specific Forums: Depending on the industry you are interested in, there may be online forums or communities that cater to specific sectors such as automotive, manufacturing, or construction. These industry-specific forums often have sections or discussions related to machinery maintenance, where taper bushes may be a topic of interest. Engaging in these forums can allow you to connect with professionals from your specific industry and gain insights into taper bush maintenance practices relevant to your field.
  • Social Media Groups and Pages: Social media platforms like Facebook, LinkedIn, or Reddit host various groups, pages, or communities focused on engineering, mechanical maintenance, or specific industries. Joining relevant groups or following pages dedicated to machinery maintenance can provide access to discussions, articles, and resources related to taper bushes and their maintenance. These platforms also allow you to connect with industry professionals and enthusiasts who can share their knowledge and experiences.

When engaging in online forums, it is important to review the forum guidelines, follow proper etiquette, and respect the rules of each community. Be mindful of the accuracy and reliability of the information shared, and consider cross-referencing multiple sources to validate the advice or recommendations provided.

By exploring these online forums and actively participating in discussions, you can find valuable information, tips, and insights on the proper maintenance of taper bushes, enhancing your understanding and proficiency in taper bush maintenance practices.

taper bush

What are the advantages of using taper bushes in power transmission systems?

Taper bushes offer several advantages when used in power transmission systems. These advantages contribute to the efficiency, reliability, and ease of maintenance in power transmission applications. Here are some key advantages of using taper bushes:

  • Easy Installation: Taper bushes are designed to simplify the installation process. They have a tapered bore that allows for easy and precise fitting onto the shaft. By using a simple tightening method, such as tightening a set screw or using a locking device, the taper bush securely locks onto the shaft, providing a reliable connection. The ease of installation reduces downtime and labor costs during equipment assembly or maintenance.
  • Secure Shaft Connection: Taper bushes provide a secure and rigid connection between the shaft and the mating component. The taper angle of the bush ensures a tight fit, minimizing any axial movement or slippage between the shaft and the component. This secure connection enhances power transmission efficiency and prevents power loss or misalignment issues, which can lead to equipment damage or decreased performance.
  • Flexibility and Interchangeability: Taper bushes offer flexibility in power transmission systems. They are available in various sizes, allowing for compatibility with different shaft diameters. This interchangeability enables easier component replacement, as taper bushes can be easily swapped out for different sizes without the need for significant modifications. It also simplifies inventory management, as a range of taper bushes can cover multiple shaft size requirements.
  • Reduced Downtime and Maintenance: The design of taper bushes facilitates quick and easy removal and replacement of components during equipment maintenance or repair. With the use of split taper bushes or quick-detachable (QD) taper bushes, the process of disassembling and reassembling power transmission systems becomes faster and more efficient. This reduces downtime, allowing for expedited maintenance procedures and minimizing production or operational disruptions.
  • Cost-Effectiveness: Taper bushes offer a cost-effective solution for power transmission applications. They are generally more affordable compared to alternative methods of shaft connection, such as keyways or splines. Additionally, taper bushes eliminate the need for complex machining processes on the shaft, reducing manufacturing costs and lead times. Their ease of installation and maintenance also contribute to overall cost savings in terms of labor and downtime.
  • Vibration Damping and Misalignment Compensation: Taper bushes provide some level of vibration damping and compensation for minor shaft misalignments. The taper angle and the clamping action of the bush help absorb and distribute vibrations, reducing stress on the shaft and other components. This feature is beneficial in power transmission systems where vibration or misalignment issues can negatively impact equipment performance, reliability, and service life.

Overall, the advantages of using taper bushes in power transmission systems include easy installation, secure shaft connection, flexibility, reduced downtime, cost-effectiveness, and vibration damping capabilities. These advantages make taper bushes a popular choice for connecting rotating shafts to various components, such as pulleys, sprockets, gears, and couplings, in a wide range of industrial applications.

China Professional Cast Iron V Belt Pulley Taper Bushing Taper Lock Bush   wholesaler China Professional Cast Iron V Belt Pulley Taper Bushing Taper Lock Bush   wholesaler
editor by CX 2023-10-31

China Professional Mighty Sheaves Steel Cast Iron Xtb Xth Qd Bushing and 1610 2517 3535 Taper Lock Bush with high quality

Product Description

Product Name Taper Bush Model 1008-5050,6050-12100
Brand Mighty Material Cast Iron GG22-GG25,Steel C45
Surface treatment Blank/phosphated/black  QD Bushing model H/JA/SH/SDS/SD/SK/SF/E/F/J/M/N/P/W/S,
orG/H/P1/P2/P3/B/Q1/Q2/Q3/R1/R2/S1/S2/U0/U1/U2/W1/W2/Y0

Feature:
1.  The simple design allows for easy maintenance, it is a simple easy-on, easy-off process.

2. Machined to high precise tolerance

3. A full range of both metric and imperial sizes taper bushes are available

4. Complete short reach range available, for compact lightweight assemblies
Taper Bush 

1.Model: 1008-5050,6050-12100

2.Material: High grade cast iron GG22-GG25;Steel C45

3.Surface treatment: Blank/phosphated/black finished

QD Bushing 
1.Model:H/JA/SH/SDS/SD/SK/SF/E/F/J/M/N/P/W/S,orG/H/P1/P2/P3/B/Q1/Q2/Q3/R1/R2/S1/S2/U0/U1/U2/W1/W2/Y0 

2.Material: Cast iron GG25/steel;

3.Surface treatment: Blank/phosphated/black finished

      

 

Feature: Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant
Application: Garment Machinery, Conveyer Equipment, Food Machinery, Agricultural Machinery
Surface Treatment: Blacking
Material: Cast Iron Gg22-Gg25, Steel C45
Color: Black and as You Required
Bore Type: Straight Bore
Samples:
US$ 0.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Where can I find educational resources on the history and development of taper bushes?

If you’re interested in learning about the history and development of taper bushes, there are several educational resources available that can provide valuable insights. Here are some places where you can find such resources:

  • Books and Publications: Check libraries, bookstores, or online retailers for books and publications on mechanical engineering, power transmission, or machine elements. Look for titles that cover the history and development of mechanical components, including taper bushes. These resources often provide detailed information on the origins, evolution, and advancements in the design and application of taper bushes.
  • Engineering and Technical Journals: Explore engineering and technical journals that focus on mechanical engineering, manufacturing, or power transmission. These journals frequently publish research articles, case studies, and historical reviews that delve into the development and advancements of various mechanical components, including taper bushes. Access these journals through academic databases, online platforms, or professional engineering organizations.
  • Online Research Databases: Utilize online research databases such as IEEE Xplore, ScienceDirect, or Google Scholar to search for scholarly articles, conference papers, or research papers related to the history and development of taper bushes. These databases host a wide range of scientific and technical publications that can provide in-depth information on the subject.
  • Manufacturers and Suppliers: Taper bush manufacturers and suppliers often provide educational materials on their websites, including technical articles, whitepapers, or product catalogs. These resources may contain information about the history, design principles, and applications of taper bushes. Visit the websites of reputable manufacturers or reach out to them directly for educational materials.
  • Engineering Associations and Societies: Engineering associations and societies, such as the American Society of Mechanical Engineers (ASME), the Institution of Mechanical Engineers (IMechE), or similar organizations in your country, may offer resources on mechanical components and historical developments in engineering. Explore their websites, publications, or digital libraries for relevant information.

When accessing educational resources on the history and development of taper bushes, it is important to critically evaluate the credibility and reliability of the sources. Look for materials authored by recognized experts, academic institutions, or reputable organizations to ensure the accuracy of the information presented.

By utilizing these educational resources, you can deepen your understanding of the history and development of taper bushes, gaining insights into their evolution, technological advancements, and practical applications in various industries.

taper bush

Are there online forums discussing the proper maintenance of taper bushes?

Yes, there are online forums where you can find discussions and information about the proper maintenance of taper bushes. These forums serve as platforms for professionals, enthusiasts, and individuals with expertise in mechanical engineering, power transmission, and machinery maintenance to share knowledge and discuss various topics related to taper bushes and their maintenance. Here are some examples of online forums where you can find discussions on taper bush maintenance:

  • Mechanical Engineering Forums: Online forums dedicated to mechanical engineering often have sections or threads where users discuss topics related to machinery maintenance. These forums provide a platform for professionals and enthusiasts to exchange information and share experiences regarding taper bushes and their proper maintenance. Participating in these discussions can provide valuable insights, tips, and best practices from a community of experts.
  • Power Transmission and Machinery Maintenance Forums: There are online forums specifically focused on power transmission systems, machinery maintenance, and related topics. These forums cover a wide range of subjects, including taper bushes and their maintenance. Users can ask questions, seek advice, and share their experiences regarding the proper maintenance procedures, troubleshooting, lubrication, or replacement of taper bushes in different machinery applications.
  • Industry-Specific Forums: Depending on the industry you are interested in, there may be online forums or communities that cater to specific sectors such as automotive, manufacturing, or construction. These industry-specific forums often have sections or discussions related to machinery maintenance, where taper bushes may be a topic of interest. Engaging in these forums can allow you to connect with professionals from your specific industry and gain insights into taper bush maintenance practices relevant to your field.
  • Social Media Groups and Pages: Social media platforms like Facebook, LinkedIn, or Reddit host various groups, pages, or communities focused on engineering, mechanical maintenance, or specific industries. Joining relevant groups or following pages dedicated to machinery maintenance can provide access to discussions, articles, and resources related to taper bushes and their maintenance. These platforms also allow you to connect with industry professionals and enthusiasts who can share their knowledge and experiences.

When engaging in online forums, it is important to review the forum guidelines, follow proper etiquette, and respect the rules of each community. Be mindful of the accuracy and reliability of the information shared, and consider cross-referencing multiple sources to validate the advice or recommendations provided.

By exploring these online forums and actively participating in discussions, you can find valuable information, tips, and insights on the proper maintenance of taper bushes, enhancing your understanding and proficiency in taper bush maintenance practices.

taper bush

Where can I get information on the key dimensions of taper bushes for compatibility?

If you are looking for information on the key dimensions of taper bushes for compatibility, there are several sources where you can obtain this information. Here are some common places to find the key dimensions of taper bushes:

  • Manufacturer’s Catalogs and Websites: Taper bush manufacturers often provide detailed catalogs or product listings on their websites. These catalogs typically include comprehensive information about the dimensions, sizes, and specifications of their taper bushes. You can find details such as bore diameter, taper angle, outside diameter, keyway dimensions (if applicable), and overall length. Manufacturer catalogs are valuable resources for understanding the compatibility of taper bushes with different shaft sizes and mating components.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical power transmission or bushing selection may contain information on the key dimensions of taper bushes. These resources are commonly available in libraries, technical bookstores, or online platforms. They provide in-depth knowledge about various types of bushings, including taper bushes, and offer guidance on selecting the appropriate size and dimensions based on shaft requirements.
  • Supplier or Distributor Documentation: If you are working with a specific supplier or distributor for taper bushes, they may provide documentation that includes dimensional information. This documentation can be in the form of product datasheets, brochures, or technical specifications. Check with your supplier or distributor to see if they have any resources available that outline the key dimensions of the taper bushes they offer.
  • Online Engineering Resources: Online platforms dedicated to mechanical engineering, industrial equipment, or power transmission systems can be excellent sources of information on taper bush dimensions. Websites, forums, or communities focused on mechanical engineering topics often have discussions, articles, or downloadable resources that include dimensional data for taper bushes. Conducting targeted searches using relevant keywords can help you find these online resources.
  • Consulting with Industry Experts: If you require specific or detailed information regarding the key dimensions of taper bushes for compatibility, consulting with industry experts or professionals in the field can be beneficial. These experts have practical experience and knowledge about power transmission systems and can provide guidance on selecting the appropriate taper bush dimensions based on your specific application requirements.

When accessing information on the key dimensions of taper bushes, it’s important to refer to reliable and trusted sources. Ensure that the information is up-to-date and aligns with industry standards. Double-check any measurements or specifications to ensure accuracy before making final decisions on taper bush compatibility.

By utilizing these various sources, you can gather the necessary information on the key dimensions of taper bushes to determine their compatibility with different shaft sizes and mating components in your power transmission system.

China Professional Mighty Sheaves Steel Cast Iron Xtb Xth Qd Bushing and 1610 2517 3535 Taper Lock Bush   with high quality China Professional Mighty Sheaves Steel Cast Iron Xtb Xth Qd Bushing and 1610 2517 3535 Taper Lock Bush   with high quality
editor by CX 2023-10-30

China Hot selling Standard Cast Iron Taper Lock Bush Supplier OEM Accepted bushing replacement

Product Description

Taper Bushings Specification:

 

Bushing No. Bore
1008 10.11.12.14.15.16.18.19.20.22.24.25
1108 10.11.12.14.15.16.18.19.20.22.24.25.28
1210 1215 11.12.14.15.16.18.19.20.22.24.25.28.30.32
1310 14.15.16.18.19.20.22.24.25.28.30.32.35
1610 1615 14.15.16.18.19.20.22.24.25.28.30.32.35.38.40.42
2012 2017 18.19.20.22.24.25.28.30.32.35.38.40.42.45.48.50
2517 2525 20.22.24.25.28.30.32.35.38.40.42.45.48.50.55.60
3571 3030 25.28.30.32.35.38.40.42.45.48.50.55.60.65.70.75
3525 3535 35.38.40.42.45.48.50.55.60.65.70.75.80.85.90
4030 4040 40.42.45.50.60.65.70.75.80.85.90.95.100
4535 4545 55.60.65.70.75.80.85.90.95.100.105.110
5040 5050 60.65.70.75.80.85.90.95.100.105.110.115.120.125

Use:
Mainly used in the mining, metallurgical, cement, chemicals,construction, buiding materials,
electric power, telecommunictions, textiles, and transportation departments.
Such as:
1. conveyor:Belt conveyor,AFC conveyor, chain conveyor, screw conveyor.
2. Pum:Water pump, oil pump, slush pump, etc.
3. Fan: Draft fan, fanner, boil fan, etc.
4. Excator:bucket excavator bucket, wheel excavators .
5. Crane:Tower crane, gantry crande, bridge crane.
6. Others:Various elevators, coal plough, ball mill, crusher, recreation machine.
7. Blender equipment, centrifuger, washer, leather-making machine, machine for recreation park mixer wire drawing machine.Extruder, dregs crusher of boiler.
8. Plastic feeder, rubber smelling machine, etc.
 
Main Products:
1. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate; 
2. Forging, Casting, Stampling Part; 
3. V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;  
4. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.; 
5. Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;  
6. Shaft Collars: including Setscrew Type, Single Split and Double Splits; 
7. Gear & Rack: Spur gear/rack, bevel gear, helical gear/rack
8. Other customized Machining Parts according to drawings (OEM).

PACKING

Packaging
                      
    Packing  

 

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

OUR COMPANY
 

ZheJiang Mighty Machinery Co., Ltd. specializes in offering best service and the most competitive price for our customer.

After over 10 years’ hard work, MIGHTY’s business has grown rapidly and become an important partner for oversea clients in the industrial field and become a holding company for 3 manufacturing factories.

MIGHTY’s products have obtained reputation of domestic and oversea customers with taking advantage of technology, management, quality and very competitive price.

Your satisfaction is the biggest motivation for our work, choose us to get high quality products and best service.


OUR FACTORY

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.

We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

Standard Or Nonstandard: Standard
Shaft Hole: Standard and Custom
Torque: Standard and Custom
Bore Diameter: Standard and Custom
Speed: Standard and Custom
Structure: Flexible
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Can I find information on taper bush alternatives for specialized applications?

Yes, you can find information on taper bush alternatives for specialized applications. There are various alternatives available that cater to specific requirements and offer unique features or advantages over traditional taper bushes. Here are some common taper bush alternatives and where you can find information about them:

  • Keyless Bushings: Keyless bushings provide an alternative to traditional taper bushes by eliminating the need for keyways and key slots. These bushings utilize frictional forces to secure the shaft, offering precise positioning, high torque transmission, and easy installation and removal. Information on keyless bushings can be found in engineering catalogs, manufacturer websites, and technical articles on power transmission components.
  • Split Taper Bushings: Split taper bushings are designed with a split along their length, allowing for easy installation and removal without the need to disassemble the entire shaft assembly. They are particularly useful in applications where frequent maintenance or shaft replacement is required. Information on split taper bushings can be obtained from supplier catalogs, manufacturer websites, and technical resources on mechanical power transmission.
  • Locking Devices: Locking devices, such as locking collars or locking assemblies, provide an alternative to taper bushes by utilizing mechanical locking mechanisms to secure the shaft. These devices offer high holding power, concentricity, and resistance to axial and radial loads. Information on locking devices can be found in engineering handbooks, manufacturer catalogs, and online resources dedicated to power transmission components.
  • Adapters and Reducers: Adapters and reducers are used to connect shafts of different sizes or configurations. They allow for the mating of components with mismatched dimensions or when transitioning from one shaft type to another. Information on adapters and reducers can be found in engineering references, mechanical design handbooks, and manufacturer catalogs specializing in power transmission components.
  • Custom Engineered Solutions: In some specialized applications, custom engineered solutions may be required to meet specific design or performance criteria. Consulting with engineering firms specializing in power transmission or seeking advice from manufacturers and suppliers can provide insights into tailored alternatives for unique applications.

When researching taper bush alternatives for specialized applications, it is important to consider factors such as load capacity, torque transmission, alignment requirements, installation ease, and maintenance considerations. Evaluating the specific needs of your application and consulting with experts in the field can help you identify the most suitable alternative solution.

Information on taper bush alternatives can be found in engineering references, mechanical design handbooks, manufacturer catalogs, online resources, and industry-specific publications. Additionally, reaching out to manufacturers and suppliers directly can provide access to detailed product information, application guidelines, and technical support.

By exploring taper bush alternatives, you can discover innovative solutions that meet the unique demands of your specialized application, optimizing performance, efficiency, and reliability in your power transmission system.

taper bush

Are there reviews comparing taper bushes from different manufacturers?

Yes, there are reviews available that compare taper bushes from different manufacturers. These reviews can provide valuable insights into the performance, quality, and features of taper bushes offered by various manufacturers. Here’s where you can find reviews comparing taper bushes:

  • Online Industrial Equipment Marketplaces: Online marketplaces specializing in industrial equipment often have customer reviews and ratings for different products, including taper bushes. These reviews are typically provided by users who have purchased and used the taper bushes in their applications. Reading these reviews can give you an idea of the experiences and opinions of other users regarding the performance, durability, and compatibility of taper bushes from different manufacturers.
  • Engineering and Mechanical Forums: Online forums and communities focused on engineering or mechanical topics can be excellent sources for finding reviews and discussions comparing taper bushes. These forums often have dedicated sections or threads where users share their experiences, recommendations, and comparisons of taper bushes from different manufacturers. Engaging in these discussions can help you gather valuable insights and perspectives from professionals and enthusiasts in the field.
  • Industrial Magazines and Publications: Industrial magazines and publications that cover mechanical engineering or power transmission topics may include product reviews or comparisons of taper bushes. These reviews are typically conducted by experts in the field or industry professionals who evaluate the performance, design, and suitability of taper bushes from different manufacturers. Checking these magazines or publications can provide you with detailed and unbiased assessments of the various taper bushes available in the market.
  • Industry Trade Shows and Exhibitions: Attending industry trade shows, exhibitions, or conferences focused on mechanical engineering or power transmission systems can offer opportunities to see and compare taper bushes from different manufacturers in person. These events often feature product displays and demonstrations, allowing you to assess the quality, design, and features of taper bushes firsthand. Additionally, you may have the chance to interact with representatives from different manufacturers and gather information or insights directly from them.
  • Manufacturer or Supplier Websites: Some manufacturers or suppliers may include customer testimonials or case studies on their websites, where users share their experiences and feedback on the taper bushes they have used. While these sources may be biased towards the manufacturer’s own products, they can still provide useful information and perspectives on the performance and compatibility of their taper bushes.

It’s important to note that while reviews can be helpful in making informed decisions, they should be considered alongside other factors such as technical specifications, compatibility requirements, and manufacturer reputation. Each application and system may have unique considerations, so it’s advisable to evaluate multiple sources of information and consult with experts if needed.

By exploring these different sources, you can find reviews and comparisons of taper bushes from different manufacturers, enabling you to make more informed decisions when selecting the most suitable taper bushes for your specific application needs.

taper bush

Where can I buy high-quality taper bushes for industrial equipment?

When it comes to purchasing high-quality taper bushes for industrial equipment, there are several options available. Here are some places where you can buy reliable taper bushes:

  • Industrial Suppliers and Distributors: Many industrial suppliers and distributors specialize in providing a wide range of mechanical components, including taper bushes. These suppliers often carry reputable brands and offer a variety of sizes and types to suit different industrial applications. They may have physical stores or online platforms where you can browse and purchase taper bushes.
  • Manufacturer’s Websites: Several manufacturers of taper bushes have official websites where you can directly purchase their products. Visiting the manufacturer’s website allows you to access detailed product information, specifications, and technical resources. It also ensures that you are buying genuine taper bushes from the original manufacturer.
  • Online Marketplaces: Online marketplaces like Amazon, eBay, or Alibaba provide a vast selection of industrial components, including taper bushes. These platforms often feature multiple sellers and brands, giving you a wide range of options to choose from. When buying from online marketplaces, be sure to review seller ratings, read customer reviews, and check product descriptions to ensure the quality and authenticity of the taper bushes.
  • Local Hardware Stores: Some local hardware stores or specialty industrial supply stores may stock taper bushes for industrial equipment. Visiting these stores allows you to physically examine the products, seek advice from knowledgeable staff, and make an immediate purchase. However, the availability and variety of taper bushes may vary depending on the specific store.
  • Industrial Trade Shows and Exhibitions: Attending industrial trade shows and exhibitions related to mechanical components and equipment can provide an opportunity to connect with manufacturers, suppliers, and distributors directly. These events often feature booths and displays where you can explore and purchase taper bushes from reliable sources.

When purchasing taper bushes for industrial equipment, it’s important to prioritize quality, reliability, and compatibility with your specific application. Consider factors such as material quality, dimensional accuracy, load-bearing capacity, and compatibility with shaft sizes and mating components.

Before making a purchase, it’s advisable to research reputable brands, read customer reviews and ratings, and compare prices and specifications from different sources. This helps ensure that you are buying high-quality taper bushes that meet your industrial equipment requirements.

Remember to also consider factors such as shipping options, return policies, and customer support when choosing where to buy taper bushes. These factors can contribute to a smooth purchasing experience and provide assistance if you have any questions or issues during or after your purchase.

China Hot selling Standard Cast Iron Taper Lock Bush Supplier OEM Accepted   bushing replacement		China Hot selling Standard Cast Iron Taper Lock Bush Supplier OEM Accepted   bushing replacement
editor by CX 2023-10-26

China Hot selling OEM Service Cast Iron V Belt Pulley and Sheave 13V365sh bushing replacement

Product Description

china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys

1.Our V-Belt Pulley Includes

Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)

 

Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)

 

Split taper bushed Pulleys (1TB,2TB,3TB series)

 

Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)

 

Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)

 

QD taper bore sheaves Pulleys (3V,5V,8V series)

 

Single Groove Pulleys (OK,OL,AL series)

 

According to customers’ requirements or drawings

2.Materials

Cast iron, steel, aluminium alloy, ect.

3.Surface treatment

powder coating, zinc plating, black oxided,etc

4.Standard

ANSI.API.BS.DIN.JIS.GB.etc.

5.Machine equipment

CNC center, CNC milling machine,CNC turning machine, CNC drilling

machine, CNC lathes, lathe, 4 axis machine etc.

6.Application field

Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.

7.Certification

ISO9001:2015

8.Warranty

One year after shippment

9. QC

1. Materials are to be checked carefully before production.

 

2.Strict processing quality control

 

3.100% inspection before shipment.

10.Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable CZPT customer’s requirements

11.Shippment

TNT, FEDEX, DHL, UPS, EMS, by air, by sea

AK Series Sheave

AK17 to AK184

 

2AK20 to 2AK184

1)Widely used in the European & America market with good hardness and strength

2)AK /2AK SHEAVES, For “4L” or “A” Belts and “3L” BELTS

3)Material: Cast iron,Steel,aluminum alloy,etc

4)Finish: Gray Powder Paint,

Warehouse & Workshop

Testing Instrument

Our testing instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Fully Automatic Two Coordinate Measuring Instrument ,Element Measuring Instrument,etc.
Company Culture

We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,

weld-on hub,any question pls feel free to contact with us, look CZPT to work with you!

 

Certification: ISO
Pulley Sizes: Ak
Manufacturing Process: Casting
Material: Cast Iron
Surface Treatment: Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

control arm bushing
China Hot selling OEM Service Cast Iron V Belt Pulley and Sheave 13V365sh   bushing replacement		China Hot selling OEM Service Cast Iron V Belt Pulley and Sheave 13V365sh   bushing replacement
editor by CX 2023-05-08

China Hot selling Browning 10-8V2480n Cast Iron V Belt Pulley for bushing and ball joint

Product Description

china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys

1.Our V-Belt Pulley Includes

Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)

 

Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)

 

Split taper bushed Pulleys (1TB,2TB,3TB series)

 

Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)

 

Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)

 

QD taper bore sheaves Pulleys (3V,5V,8V series)

 

Single Groove Pulleys (OK,OL,AL series)

 

According to customers’ requirements or drawings

2.Materials

Cast iron, steel, aluminium alloy, ect.

3.Surface treatment

powder coating, zinc plating, black oxided,etc

4.Standard

ANSI.API.BS.DIN.JIS.GB.etc.

5.Machine equipment

CNC center, CNC milling machine,CNC turning machine, CNC drilling

machine, CNC lathes, lathe, 4 axis machine etc.

6.Application field

Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.

7.Certification

ISO9001:2015

8.Warranty

One year after shippment

9. QC

1. Materials are to be checked carefully before production.

 

2.Strict processing quality control

 

3.100% inspection before shipment.

10.Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable CZPT customer’s requirements

11.Shippment

TNT, FEDEX, DHL, UPS, EMS, by air, by sea

AK Series Sheave

AK17 to AK184

 

2AK20 to 2AK184

1)Widely used in the European & America market with good hardness and strength

2)AK /2AK SHEAVES, For “4L” or “A” Belts and “3L” BELTS

3)Material: Cast iron,Steel,aluminum alloy,etc

4)Finish: Gray Powder Paint,

Warehouse & Workshop

Testing Instrument

Our testing instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Fully Automatic Two Coordinate Measuring Instrument ,Element Measuring Instrument,etc.
Company Culture

We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,

weld-on hub,any question pls feel free to contact with us, look CZPT to work with you!

 

Certification: ISO
Pulley Sizes: Ak
Manufacturing Process: Casting
Material: Cast Iron
Surface Treatment: Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

bushing arm
China Hot selling Browning 10-8V2480n Cast Iron V Belt Pulley for   bushing and ball joint		China Hot selling Browning 10-8V2480n Cast Iron V Belt Pulley for   bushing and ball joint
editor by CX 2023-05-06

China Hot selling Browning 85V1090f Cast Iron V Belt Pulley for bushing and control arm

Product Description

china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys

1.Our V-Belt Pulley Includes

Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)

 

Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)

 

Split taper bushed Pulleys (1TB,2TB,3TB series)

 

Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)

 

Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)

 

QD taper bore sheaves Pulleys (3V,5V,8V series)

 

Single Groove Pulleys (OK,OL,AL series)

 

According to customers’ requirements or drawings

2.Materials

Cast iron, steel, aluminium alloy, ect.

3.Surface treatment

powder coating, zinc plating, black oxided,etc

4.Standard

ANSI.API.BS.DIN.JIS.GB.etc.

5.Machine equipment

CNC center, CNC milling machine,CNC turning machine, CNC drilling

machine, CNC lathes, lathe, 4 axis machine etc.

6.Application field

Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.

7.Certification

ISO9001:2015

8.Warranty

One year after shippment

9. QC

1. Materials are to be checked carefully before production.

 

2.Strict processing quality control

 

3.100% inspection before shipment.

10.Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable CZPT customer’s requirements

11.Shippment

TNT, FEDEX, DHL, UPS, EMS, by air, by sea

AK Series Sheave

AK17 to AK184

 

2AK20 to 2AK184

1)Widely used in the European & America market with good hardness and strength

2)AK /2AK SHEAVES, For “4L” or “A” Belts and “3L” BELTS

3)Material: Cast iron,Steel,aluminum alloy,etc

4)Finish: Gray Powder Paint,

Warehouse & Workshop

Testing Instrument

Our testing instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Fully Automatic Two Coordinate Measuring Instrument ,Element Measuring Instrument,etc.
Company Culture

We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,

weld-on hub,any question pls feel free to contact with us, look CZPT to work with you!

Certification: ISO
Pulley Sizes: Ak
Manufacturing Process: Casting
Material: Cast Iron
Surface Treatment: Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

supplier
China Hot selling Browning 85V1090f Cast Iron V Belt Pulley for   bushing and control arm	China Hot selling Browning 85V1090f Cast Iron V Belt Pulley for   bushing and control arm
editor by CX 2023-04-26

China factory Factory Customized Pulley SPA 100/1 Tb V Belt Pulley Cast Iron with Taper Bush for European Standard differential bushing

Product Description

SPC 5Groove 1250mm Pitch 5050 Taper Bush large diameter v belt pulley

 

European Standard SPZ, SPA, SPB, SPC pulley.

Features: 
* Easy Installation & remove
* Reduce wear and extend belt life
* Increase the versatility of the product * Reduce noise
Application:

Narrow V belt transmission is articularly suitable for high-power, transmission requirements compact power transmission mechanism. Widely used in a variety of power transmission, such as: mining machinery, petroleum, metallurgy, chemical, textile, lifting and other industrial equipment.

 

Pulley Dimensions

 

a

b

c

d

e

f

h

34°

38°

SPZ

9.7

8.5

8.0

12

8.0

2.5

12

p≤80

p≥80

SPA

12.7

11

10.0

15

10.0

3.5

15

p≤118

p≥118

SPB

16.3

14

12.5

19

12.5

4.0

18

p≤190

p≥190

SPC

22.0

19

16.0

25

16.0

24

24

p≤315

p≥315

 

Belt Dimensions

 

m

s

n

SPZ

9.7

8.0

8.5

SPA

12.7

10.0

11.0

SPB

16.3

13.0

14.0

SPC

22.0

18.0

19.0

 

 

Europe Standard Types SPZ-SPA-SPB-SPC
Bore For Taper Bushings
Production
Range
Number Of Groove:1~10
Pitch Diameter:50-1250(mm)
Material Cast Iron
Finish Black Phosphate,Plastic Coating

 

European standard taper bush

Bush No

Bore Range (mm)

2517

20,22,24,25,28,30,32,35,38,40,42,45,48,50,55,60

3571

25,28,30,32,35,38,40,42,45,48,50,55,60,65,70,75

3030

25,28,30,32,35,38,40,42,45,48,50,55,60,65,70,75

3525

35,38,40,42,45,48,50,55,60,65,70,75,80,85,90

3535

35,38,40,42,45,48,50,55,60,65,70,75,80,85,90

4030

40,42,45,50,60,65,70,75,80,85,90,95,1, ZheJiang , P.R.China

 

Tel: -571-8675-2139 Fax: -571-8675-7319

 

Certification: ISO
Pulley Sizes: Type A
Manufacturing Process: Casting
Material: S45c, Gg25, Ggg40
Surface Treatment: Phosphating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

brass bushing
China factory Factory Customized Pulley SPA 100/1 Tb V Belt Pulley Cast Iron with Taper Bush for European Standard   differential bushingChina factory Factory Customized Pulley SPA 100/1 Tb V Belt Pulley Cast Iron with Taper Bush for European Standard   differential bushing
editor by CX 2023-04-25

China high quality Cast Iron American Standard Sheave 1b62SDS bushing clamp

Product Description

china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys

1.Our V-Belt Pulley Includes

Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)

 

Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)

 

Split taper bushed Pulleys (1TB,2TB,3TB series)

 

Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)

 

Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)

 

QD taper bore sheaves Pulleys (3V,5V,8V series)

 

Single Groove Pulleys (OK,OL,AL series)

 

According to customers’ requirements or drawings

2.Materials

Cast iron, steel, aluminium alloy, ect.

3.Surface treatment

powder coating, zinc plating, black oxided,etc

4.Standard

ANSI.API.BS.DIN.JIS.GB.etc.

5.Machine equipment

CNC center, CNC milling machine,CNC turning machine, CNC drilling

machine, CNC lathes, lathe, 4 axis machine etc.

6.Application field

Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.

7.Certification

ISO9001:2015

8.Warranty

One year after shippment

9. QC

1. Materials are to be checked carefully before production.

 

2.Strict processing quality control

 

3.100% inspection before shipment.

10.Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable CZPT customer’s requirements

11.Shippment

TNT, FEDEX, DHL, UPS, EMS, by air, by sea

AK Series Sheave

AK17 to AK184

 

2AK20 to 2AK184

1)Widely used in the European & America market with good hardness and strength

2)AK /2AK SHEAVES, For “4L” or “A” Belts and “3L” BELTS

3)Material: Cast iron,Steel,aluminum alloy,etc

4)Finish: Gray Powder Paint,

Warehouse & Workshop

Testing Instrument

Our testing instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Fully Automatic Two Coordinate Measuring Instrument ,Element Measuring Instrument,etc.
Company Culture

We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,

weld-on hub,any question pls feel free to contact with us, look CZPT to work with you!

 

Certification: ISO
Pulley Sizes: Ak
Manufacturing Process: Casting
Material: Cast Iron
Surface Treatment: Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

bushing assembly
China high quality Cast Iron American Standard Sheave 1b62SDS   bushing clamp		China high quality Cast Iron American Standard Sheave 1b62SDS   bushing clamp
editor by CX 2023-04-24

China factory Cast Iron 3535 Taper Lock Bush and Weld on Hub with Taper Lock bushing block

Product Description

Product Name Taper Bush Model 1008-5050,6050-12100
Brand Mighty Material Cast Iron GG22-GG25,Steel C45
Surface treatment Blank/phosphated/black  QD Bushing model H/JA/SH/SDS/SD/SK/SF/E/F/J/M/N/P/W/S,
orG/H/P1/P2/P3/B/Q1/Q2/Q3/R1/R2/S1/S2/U0/U1/U2/W1/W2/Y0

     

      

 

Certification: CE
Pulley Sizes: 1008-5050, 6050-12100
Manufacturing Process: Cold Extrusion
Material: Cast Iron Gg22-Gg25, Steel C45
Surface Treatment: Blacking
Application: Chemical Industry, Grain Transport, Industrial Transmission, Textile Machinery
Samples:
US$ 0.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bushing assembly
China factory Cast Iron 3535 Taper Lock Bush and Weld on Hub with Taper Lock   bushing block		China factory Cast Iron 3535 Taper Lock Bush and Weld on Hub with Taper Lock   bushing block
editor by CX